|
LT2000-SP Laser Distance Measurement Meter |
|
|
|
|
Model LT2000-SP Laser Distance
Measurement Meter
|
LT2000-SP
Laser Distance Measurement
Sensor
-
Visible class II
laser providing precise distance measurement
-
Operates off natural surfaces up to 30 meters (98 feet), off a white
target at 100 meters (328) and off a special reflector target at 150 meters
(492 feet)
-
Measuring rate as low as 100 msec. off a white surface
-
Provides +/- 2mm to +/- 5mm accuracy
-
RS232 or RS422 Serial Interface
-
Programmable 4 - 20mA Analog Output
-
Programmable Digital Output & Offset
-
External Trigger Input
-
IP66 Glass Fiber Reinforced Polyester Enclosure Weather Resistant -
Corrosion Proof
Typical Applications
| Product Material |
Length, width, level and
position of product. |
| Material
Handling |
Automated
storage/retrieval systems and positioning of mobile equipment. |
| Crane
Control |
Positioning of cranes & crane
trolleys. |
| Collision
Avoidance |
Distance alarm between vehicles
using reflective target. |
The LT2000-SP Laser Distance Meter
operates over a substantial range off static or passing product in
difficult areas in harsh environments. The LT2000-SP measures distances
over a working range up to 30 meters off of natural surfaces, up to
100 meters off of white surfaces and up to 150 meters off of a special
reflector. For operation with automated positioning control of material
handling transport systems a white reflective target is used or the
special reflector is used.
Especially suited for precise detection and measurement of cold/hot
product at temperatures up to 600°C. For higher product temperature a
Model LT2000-HT is available for measurement of cold/hot product at
product temperatures up to 1200°C (2192°F) .
Straightforward alignment is easily accomplished via the visible red
laser measuring beam.
|
Accuracy is +/- 2mm to +/- 5mm according to ambient
temperature and surface reflectivity. Repeatability is +/- 0.5mm and the
user scalable resolution is 0.1mm.
The zero offset and the span of the 4 - 20mA analog output are both user
programmable. The distance offset is also user programmable, this allows
the user to define a zero point independent of the analog output zero
offset.
Provided with a user programmable digital switching output which is
triggered by exceeding in the positive or negative direction a user
programmable distance threshold. The hysteresis of the digital switching
output is also programmable.
The LT2000-SP is a robust Laser Distance Meter and is provided in a NEMA
4 - IP65 fiber reinforced polyester weather resistant corrosion proof
enclosure. Standard operating temperature range 50°C.
The LT2000-SP Laser Distance Meter provides a highly accurate
measurement reading. It is ideal for length, thickness, depth and height
position determination.
Supplied as standard with either a RS232 or RS422/RS485 serial
interface with a 2400 to 38,400 Baud Rate & a programmable 4 - 20mA 16
BIT analog output. An optional ProfiBus DP Gateway Interface Box is
available. ProfiBus DP, DeviceNet and Ethernet Interface Options will
soon be available. |
|
|
|
|
|
|
|
|
MODULOC
Technology - The Total Sensor Solution |
|
The
MODULOC LT2000-SP
Laser Distance Measurement Meter
is part of the
MODULOC
Laser Measurement Sensors Group |
|
|
Additional Info on the
LT2000 Product Family of Laser Distance Measurement Meters: |
|
|
|
|
|
|
|
 |
|
Replacement for Hubbell Remote Series 4000 Photo-Switch
Replacement for Hubbell Sensors Parts List
Replacement for Hubbell 9388 Pathfinder Hot Metal Detector
Replacement for Hubbell 9700 Long Range Proximity Sensor
Replacement for Hubbell 9800 Hot Metal Detectors
Replacement for Hubbell 9900 Hot Metal Detectors
Replacement for Hubbell 9900 Hot Metal Detector Remote Lenses
|
|
|
|
|
|
|
