|
Operating Range1)
(type of surface) |
Natural Surface: 0.2M (7.8in) to 25M (82FT)
White Surface: 0.2M (7.8in) to >85M (279FT)
Special Reflector: 2M (6.6FT) to >125M (410FT) |
Supply Voltage |
10 - 30 VDC
|
|
Power Consumption |
1
Watt Operating, 0.4 Watt in Standby |
|
Accuracy (according to surface reflectivity) |
± 3mm
(0.118in) for 15°C
(59°F) to 30°C (86°F) |
Operating Temperature |
-10°C
(14°F) to +50°C (122°F) no cooling |
|
± 5mm
(0.197in) over full operating temp. range |
|
Resolution |
0.1mm user (programmable & scalable) |
Storage
Temperature |
-20°C
(-4°F) to +70°C (158°F) |
|
Repeatability |
± 0.5mm
(0.0197in) |
|
Scale (programmable) |
Output cab
be M, cm, mm, yd, ft and inches |
Product Temp. Limit |
Standard
600°C
(Hi-Temp model available) |
|
Measuring Time2)
(according to type of surface reflectivity) |
Any
Surface: 160 msec to 6 sec3)
(typically 200 msec) |
Serial Interface (selectable)
|
RS232 or
RS422/RS485 (2400 - 38,400 baud)
|
|
White
Surface: 100 msec
(in DW measuring mode) |
|
Laser Wavelength |
659nm,
Visible Red |
Communication Protocol |
Half
Duplex via ASCII codes |
|
Laser Classification |
Safety
Class 2 (DIN EN 60825-1), Class
II |
Programming |
via
hyper-terminal and supplied software |
|
Laser Power |
1 mW |
Optional Interface* |
ProfiBus
DP gateway connection box |
|
Laser Divergence |
0.6 mrad |
Auto Distance Tracking |
Can be
programmed to start at power on |
|
Laser Spot Diameter |
6mm
(0.236in) at 10M (32.8ft)
60mm (2.36in) at 100M (238ft) |
Digital Output |
High value
output with adjustable threshold, logic and hysteresis. 0.5 A limit |
|
MTTF |
32,000 hrs |
Analog Output
|
Programmable 4-20mA, 16 BIT (0.15%) with 500 ohm load resistance.
Programmable zero and span. Temperature drift of < 50ppm/°C
|
|
Trigger Input |
Adjustable
with delay & hi/lo adjustment
(DF Measuring Mode) |
