Moduloc Control Systems Sensors & Systems  For Control, Measurement & Management for Process Automation. Moduloc Control Systems Industrial Sensors & Systems for Control, Measurement & Management for Mill & Process Automation.
 MDHD600 Laser Distance Measurement Meter Technical Info

MDHD600

Description Technical Info Housing
Info
Brochure Request
More Info
The following is specifications and dimensional information on the housing for the Moduloc Control Systems MDHD600 Laser Distance Measurement Sensor
 
Specifications

Working Range

High Gain Reflective Foil

0.5 - 600 M (1.6 - 1968FT) 2) 3)

using High Gain Reflective Foil

High Gain HR Plastic Reflectors 0.5 - 800 M (1.6 - 2625FT) 2) 3) using High Gain HR Plastic Reflectors3)
High Gain Triple Glass Prisms 0.5 - 1200 M (1.6 - 3937FT) 2) 3) using High Gain Triple Glass Prisms3)

Relative Accuracy

Repeatability1)

+/- 2mm1)

Temperature drift 0.3mm/K

Laser Data

Measurements per second

5000

 

Measurements output up to 1 ms for N>1 moving average time higher
Measuring Laser Safety Class I EN 60825-1:2001, CDRH
Laser Divergence 5 mrad Spot Diameter (mm) = 20 mm + 5* x M
Laser Wavelength 905 nm  
Light Spot diameter 7cm/52cm at 10M/100M
Red Laser Pointer Safety Class II Operates via serial interface
Measuring Mode options Continuous Standard Single value and Moving average
Outputs Interface (electrically isolated) RS232 or RS422 ASCII Text or Binary Code
Analog (electrically isolated) 4-20mA (programmable) 0.3%, Start and Stop
Switching Output (electrically isolated) Dual NPN (E1, E2) Threshold, direction and hysteresis
Display 4 LED's Status function Display

Power Supply

18 - 30 VDC Isolated

0.25A@24 VDC

Electrically Isolated

Environmental Enclosure Protection Class           

IP65

Aluminum housing, 1.3kg

Shock & Vibration Rating IEC 68  
Temperature Range Operational: -10 to +55°C (14 to 131°F) Storage: -25 to +70°C (-13 to 158°F)
1). Repeatability for typical devices under constant environmental conditions (approx. 20°C, 1013 mbar, same target) after at least 30 minutes power-on time.
2). When close up range blanking is activated the minimum to 2M.
3). Increased Range is attained by the use of the appropriate sized High Gain Reflective Foil plus the addition of High Gain HR Plastic Reflectors or High Gain Triple Glass Prisms.
 

MDHD600

Description Technical Info Housing
Info
Brochure Request
More Info
 

For Additional Info on the ELDP & MDHD Product Family of Laser Distance Measurement Meters Click the Model Number Below:

Product of
Family

MDHD100 MDHD600 MDHD20HT ELDP10 Accessories
 

MODULOC Technology - The Total Sensor Solution

The MODULOC MDHD600 Laser Distance Measurement Meter is part of the MODULOC Laser Measurement Sensors Group

Replacements For Hubbell Sensors


Replacement for Hubbell Remote Series 4000 Photo-Switch    Replacement for Hubbell Sensors Parts List
Replacement for Hubbell 9388 Pathfinder Hot Metal Detector
Replacement for Hubbell 9700 Long Range Proximity Sensor
Replacement for Hubbell 9800 Hot Metal Detectors Replacement for Hubbell 9900 Hot Metal Detectors
Replacement for Hubbell 9900 Hot Metal Detector Remote Lenses

 

 

CLICK HERE TO CONTACT  US

Copyright © 2002-2010 MODULOC CONTROL SYSTEMS

 

www.moduloc-usa.com
E-mail: info@moduloc-usa.com

 

 For questions or comments about this web site please send mail to webmaster@moduloc-usa.com

Last modified: May 14, 2010
Website Designed,  Maintained and Hosted by: 

NetWebz - Website Hosting 100 MB for $5.00/month.

Would You like additional information on the MODULOC Line on Sensors and Lasers?
Click here for our Request for Information Page.