MLC750 Laser Triangulation Meters Technical Info

MLC750 Laser Triangulation Meters Technical Info

Description

Technical Info

Housing
Info

Brochure

Request
More Info

The following is specifications and dimensional information on the housing for the Moduloc Control Systems MLC750 Laser Triangulation Meters

Specifications

Serial Output	RS232 Standard - up to 115200 baud¹⁾	Supply Voltage	24VDC ±10%
Serial Output	RS422 (optional)	Power Consumption	4.5 Watt
Digital Output	Digital output 1/10 values of full range	Humidity	Max 90% RH (non condensing)
Analog Output²⁾	1-9VDC & 4-20mA²⁾	Operating Temperature	0°C to +45°C (32°F to 113°F)
Measuring Frequency	2000 Hz³⁾	Storage Temperature	-20°C to +70°C (-4°F to 158°F)
Update Frequency	1000/2000 Hz	Product Temp. Limit	Standard 450°C/842°F
Measured Range	400 - 1100 mm	Laser Class⁴⁾	Class II. IEC 2⁴⁾
Center Distance	750 mm	Light Source	Visible 655/670 nm Laser
Resolution	0.5 mm	Laser Spot Option	Ø 4 mm
Reproducibility (+/-)	±0.5 mm	-S5 Option (5kHz measuring update)	Available
Linearity (of full scale)	±0.1%	-S5 Option (10kHz measuring update)	Available
Temperature Deviation	±0.03% of F.S./°C	-HM Option (high temp.)	Available
Measuring Range	700 mm

1)= The default baud rate is 38400 at 1kHz update frequency. The 115200 baud rate is at 2kHz update frequency.
2)= Analog Output is pre-set at the factory and can be configured, at an additional cost, to suit specific requirements. Analog output frequency is the same as the measuring frequency.
3)= Optional 5000 Hz and 10000Hz measuring frequency is available.
4)= Laser class IIIR (3R) is supplied with the combination of options -HM & -S5. Laser Class IIIB (3B) can be supplied for special applications where the surface mirror type properties.