|
|
|
Model MLS505 Laser
Triangulation Meters
|
MLS505 Laser Triangulation Meters
-
Laser Triangulation & CCD array
technique with digital signal processing.
-
Non-Contact Measurement of Distance,
Displacement, Thickness & Difference.
-
Works on almost any surface.
-
2 High Temperature versions available
for Target Surface temperature of 1000°C, 1300°C or 1500°C
-
Measurement range: 450 - 550 mm. (17.7 -
21.7 in.)
-
Resolution: 0.01 mm
-
Measurement frequency of 1000 Hz, 2000Hz
or 5000Hz
-
Robust Design
-
Serial & Analog Outputs - Optional
Ethernet Now Available
-
Synchronized thickness measurement with
two sensors.
-
Secondary Environmental Enclosure are
available including Air Purged, Air Cooled and Water Cooled with Air
Purging.
Typical Applications
| Product Material |
Length, width, level and
position of product. |
| Metals Industry |
Measure/Position
slab, billet, bloom or bar, automatic cutoff. |
The MLS505 Laser
Triangulation Meter (LTM) is a compact unit with integrated optics and
signal processor for precise measurement of distance or product
thickness and width. A focused laser spot is illuminated on the object
and the image distance determined by internal CCD array. LED’s indicate
when the object is at the center or is outside of the measuring range.
Installation software is provided for connection to a PC and to display
measured values. Measurement of data is via RS232 and analog outputs.
The MLS505 operates at a measuring and serial output update frequencies
of 1,000 measurements per second. The MLS505 has programming/select
functionality. The main feature is Group Mode. In Group Mode a running
average is calculated over a user specified number of measuring points.
The user also programs the meter to disregard a number of, usually all
(if there are any zero measurement results), before calculating the
average value. The average values are calculated at full measuring
frequency and are used for converting the analog signals.
|
|
Two identical MLS505 LTM’s when connected together automatically provide
change in thickness, width or difference values. The standard MLS1950
operates at a 1kHz measuring & update frequency and has a serial
interface baud rate of 38400. The optional -S2 model operates at a 2kHz
measuring frequency and at a 1kHz or 2kHz update frequency, and has a
serial interface baud rate of 38400 or 115200. The optional -S5 model
operates at a 5kHz measuring frequency, and at a 1kHz, 2½kHz or 5 kHz
update frequency and has a serial interface baud rate of 38400, 115200
or 230400. The baud rate of 230400 requires option -R4 RS422/RS485
serial Interface.
The MLS505 laser triangulation meters has a broad range of usage for
measurement off surfaces where other devices fail. Ideal for measuring
off wood, plastic, glass, rubber, paper, foam, textiles, food product,
cold, hot or molten metals as well as various liquids.
|
|
|
|
|
|
|
|
Click Here for Additional
information on MLS Laser Triangulation Meters. |
|
|
|
|
|
|
|
|
|
|
|
