Series 310 Enhanced Range Pulse Induction Metal Detector 

• Detects Individual Bars and Sections across wide roller tables
• 3 Times the Range of Inductive Sensors
• Can mount in confined space within protective steel enclosure
• Glass fiber coil withstands bar op to 300°C passing over it
• Detects individual bar and section at 120mm range regardless of size
• Narrow profiled coil built-to-order of up to 2M in length
• PTFE Coil for high temperature use
• Controller can mount 30M from coil

These Series 310 Metal Detectors operate by generating a pulsed flux and monitoring its rate of collapse when the metal bar passes overhead.

This method of detection provides 3 times the range of inductive Sensors. In addition the coils may mount closely surrounded by metalwork or secured within protective steel enclosure. Furthermore, as the coil windings are PTFE insulated can be used where the bar relatively hot.

The detector coils are provided in profiled glass fiber cases or PTFE coil plates with optional PTFE flying leads for high temperature areas. Stainless loop detector coils available for cooling beams. Changes in ambient do not influence operating range.

These Detectors are the ideal solution where the user needs to detect individual bars across wide roller tables where Inductive sensors are in adequate. Also well suited for cooling beds as the remote coils can be provide in PTFE Coil plates supported in protective metal frame with additional water cooling radiator as required