ELDP & MDHD Laser Distance Measurement Meters

 

Coil Transfer Car Positioning using laser distance measurement.

Continuous Caster Torch cut to length control, and hot product length and width  measurement

• Industrial Laser Distance Measurement.
• ELDP-MDHD product family includes four models with working ranges of up to 1200 meters according to reflection surface.
• Advanced Time of Flight Laser totally safe Class I Measurement Technology provides precise laser distance measurement.
• Powerful Micro-Processor with self diagnostics.
• High resolution of between 1.5 to 5 mm (depending on model)
• Fast measurement rate down to 1ms
• Robust compact industrial design
• Switch selectable RS232, RS422 serial interface and programmable analog interface plus digital outputs. Optional Profibus DP interface is available.
• Selectable visible Class II pulsed laser pointer for aiding alignment.
• A High Temperature Model is available that can be used with red hot metal up to 1400°C (2552°F)
• Secondary Environmental Enclosures are available for additional protection for indoor, outdoor and elevated temperature applications.

Typical Applications

• Product Material: Laser measurement of length, width, level and position of product.
• Material Handling: Laser positioning of Automated Storage Retrieval Systems and other handling vehicles.
• Metals Industry: Laser Measurement & Laser Positioning of  slabs, billets, blooms or bars, laser positioning of automatic cutoff and laser measurement of coil diameter.
• Crane Positioning: Automated laser positioning of cranes & crane trolleys on X, Y and Z axis.
• Collision Avoidance: Laser Distance Measurement provides safety warning between vehicle to vehicle or vehicle to wall using a reflective target.

Click Here for Additional information on the ELDP Laser Distance Measurement Meters.

Low Cost Model LT2000-SO Laser Distance Meter

Model LT2000-SP Laser Distance Meter for Outdoor Applications

Model LT2000-XT Laser Distance Meter for Explosion Proof Applications
 

• Accurate Industrial Laser Distance Measurement.

• Visible Red Class II Laser

• Operates off of Natural Surfaces up to 50 Meters, off of a white target up to 100 meters and off a a special target of up to 150 Meters

• Provides +/- 3 mm to +/- 5 mm accuracy according to operating range and reflective surface.

• Low cost laser distance measurement yet long range and accurate.

• The LT2000-HT is High Temperature Model is available that can be used with red hot metal up to 1200°C (2192°F)

• RS232 & RS422  Serial Interface, switch selectable. Optional Profibus Gateway Interface Box is available.

• Programmable 4-20 mA Analog Output 

• Programmable Digital Output & Offset

• External Trigger Input

• Various Enclosure Designs are available to meet all of your application requirements.

• Update rate of 5 to 10  Hz according to reflective surface.

• The LT2000-ST and LT2000-HT have a Robust cast aluminum housing rated IP66 with unique combined air purge & cooling facility. Optional water cooling housing available.

• The LT2000-SO has a IP65 Extruded Aluminum Enclosure can be used for a variety of Light Industrial Applications.

• The LT2000-SP has an IP66 Polyester Enclosure and is used for outdoor Applications.

• The LT2000-XT has an Explosion Proof/NEMA 4X Aluminum Enclosure that can be used for Applications including, Class I, Groups B, C, D; Class II, Groups E, F, G and Class III.

Typical Applications

• Product Material: Laser measurement of length, width, level and laser positioning of product.
• Material Handling ;Positioning of Automated Storage/Retrieval Systems and other handling vehicles.
• Steel & Metals Industry: Measure/Position slab, billet, bloom or bar, automatic cutoff and coil diameter.
• Crane Control: Positioning of cranes & crane trolleys on X, Y and Z axis.
• Collision Avoidance: Distance safety warning between vehicle to vehicle or vehicle to wall.

Model LT2000-SC Laser Distance Meter
 

Model MLB165 Laser Triangulation Meter

• Laser Triangulation & CCD array technique with digital signal processing using Visible Red Class II Lasers.
• Precise Laser Distance Measurement by triangulation
• This product family includes nineteen models with working ranges from 100mm  up to 4 meters.
• Measuring ranges: 100mm (4") to 4M (13 Feet)  (depending on model))
• Resolution & Reproducibility: .002mm to 0.5mm  (depending on model)
• 4 - 20MA Analog Output
• RS232 Serial Interface. Optional RS422/R485 is Available.
• High Temperature Models available that can be used with red hot metal up to 1200°C (2192°F) and up to 1500°C (2732°F)
• Secondary Environmental Enclosures available for a variety of mill applications, Including Air Purge with Air Cooling and Air Purge with Water Cooling.

  Typical Applications

• Laser Liquid Level Control

• Laser Distance measurement

• Laser Thickness Measurement

• Laser Thickness Measurement of metal/steel bar, plate, slab and strip.

• Laser Thickness Measurement of any flat product including plastic, film, glass, wallboard, etc.

• Weight/Volume Control

• Constant Tension Control

• Laser measurement of Roll Diameter

• Laser measurement of Aluminum, Steel, Plastic or Paper Coil Diameter

• Laser  Profile Measurement

• Laser Control of vacuum in containers

• Laser Measurement for feedback in productions lines

• Laser Measurement for quality control and statistics

• Laser measurement for Vibration Monitoring of a Rotating Object

• Laser Control of surface treatments

• Laser Level Control of Molten Metal

• Ideal for Laser measurement off wood, plastic, rubber, paper, foam, textiles, food product, cold, hot or molten metals as well as various liquids

MODULOC^® Technology - The Total Laser Solution