|
Model LT2000-ST-EN Laser Distance
Measurement Meter with a
SLB-A "L" Bracket Mounting Stand
Model LT2000-ST-EN Laser
Distance
Measurement Meter - Rear view showing RJ45 Ethernet Connection and
Electrical Connection
|
General Description
The LT2000-ST-EN Laser Distance Meter
with Ethernet Interface
operates over a long substantial range off static or passing product in
difficult areas in harsh environments. The LT2000-ST-EN measures distances
over a working range up to 30 meters off of natural surfaces , up to
100 meters off of white surfaces and up to 150 meters off of a special
reflector. For operation with automated positioning control of material
handling transport systems a white reflective target is used or the
special reflector is used.
Especially suited for precise detection and measurement of cold/hot
product at temperatures up to 600°C (1112°F). For higher product temperature a
Model LT2000-HT is available for measurement of cold/hot product at
product temperatures up to 1260°C (2300°F).
Straightforward alignment is easily accomplished via the visible red
laser measuring beam.
Accuracy is +/- 2mm to +/- 5mm according to ambient
temperature and surface reflectivity. Repeatability is +/- 0.5mm and the
user scalable resolution is 0.1mm.
The distance offset is user programmable, this allows
the user to define a zero point independent of the zero
offset.
Provided with a user programmable digital switching output which is
triggered by exceeding in the positive or negative direction a user
programmable distance threshold. The hysteresis of the digital switching
output is also programmable.
This Robust Laser Distance Meter with built-in air coolant chamber
venting as air purge. Standard operating temperature without air cooling
is 50°C and with air cooling is 60°C. Optional In Line Vortex Air
Cooling for operating temperature up to 90°C. Optional water cooling is
available for an operating temperature up to 120°C.
The LT2000-ST-EN Laser Distance Meter provides a highly accurate
measurement reading. It is ideal for length and width determination, and
checking position of product in and around furnace areas.
The LT2000-ST-EN is supplied as standard and with an Ethernet Interface with
Industrial RJ45 Receptacle. The Ethernet Interface is configured as an
Ethernet Web Server.
|
