Moduloc Control Systems Sensors & Systems  For Control, Measurement & Management for Process Automation. Moduloc Control Systems Industrial Sensors & Systems for Control, Measurement & Management for Mill & Process Automation.
 LT2000-ST-PB Laser Distance Measurement Meter Technical Info

LT2000-ST-PB

Description Technical Info Housing
Info
Brochure Request
More Info
The following is specifications and dimensional information on the housing for the Moduloc Control Systems LT2000-ST-PB Laser Distance Meter with ProfiBus DP Interface
 
Specifications

Operating Range
(type of surface)

Natural Surface: 0.2M (7.8in) to 30M (98FT)
White Surface: 0.2M (7.8in) to >100M (328FT)
Special Reflector: 2M (6.6FT) to >150M (492FT)

Laser Spot Diameter

6mm (0.236in) at 10M (32.8ft)                    
60mm (2.36in) at 100M (238ft)

MTTF 32,000 hrs

Accuracy (according to surface reflectivity)

± 3mm (0.118in) for 15°C (59°F) to 30°C (86°F)

Operating Temperature

-10°C (14°F) to +50°C (122°F) no cooling

-10°C (14°F) to +60°C (140°F) with air cooling
± 5mm (0.197in) over full operating temp. range +2°C to 120°C with (5°C/68°F) water cooling

Resolution

0.1mm user (programmable & scalable)

Storage Temperature

-20°C (-4°F) to +70°C (158°F)

Repeatability ± 0.5mm (0.0197in)

Scale (programmable)

Output cab be M, cm, mm, yd, ft and inches

Supply Voltage

-86  10 - 30 VDC

Measuring Time (according to type of surface reflectivity) Any Surface: 160 msec to 6 sec            (typically 200 msec)

 Power Consumption

1 Watt operating, 0.4 Watt in standby

White Surface: 100 msec                               (in DW measuring mode)
Laser Wavelength 659nm, Visible Red Product Temp. Limit Standard 600°C (Hi-Temp model available)
Laser Classification Safety Class 2 (DIN EN 60825-1), Class II Data Interface RS232, 9600 Baud, ASCII, 8NI
Laser Power 1 mW Bus Interface Ethernet Web Server, RJ45, CAT5E
Laser Input Adjustable with delay & hi/lo adjustment (DF Measuring Mode) Auto Distance Tracking Can be programmed to start at power on
Laser Divergence 0.6 mrad
1). Ranges shown are for DT, DW & DM. measuring mode. DS measuring mode has a range of 0.5M (197.7IN) to 7M (23FT)
2). Measuring Time can also be present in intervals of 240 msec to 6 seconds in DT measuring mode and present in intervals of 150M to 3.75 seconds in DS measuring mode.
3). In DT & DS measuring mode
 
 
Part Number Specifications   
Supply Voltage: -86 10 - 30 VDC   -  
Cooling: -A Air Cooled & Air Purged      
  -D Water Cooled & Air Purged      
Connector: -P 12 Pin IP66 Plug/Socket      
           
 

LT2000-ST-PB

Description Technical Info Housing
Info
Brochure Request
More Info
 

MODULOC Technology - The Total Sensor Solution

The MODULOC LT2000-ST-EN Laser Distance Meter with Ethernet Inteface is part of the MODULOC Laser Measurement Sensors Group
Additional Info on the LT2000 Product Family of Laser Distance Measurement Meters:

LT2000-ST

LT2000-SC LT2000-SP LT2000-SO LT2000-XT LT2000-HT
LT2020-ST LT2020-SC LT2020-SP LT2020-SO LT2020-XT LT2000 Family

Replacements For Hubbell Sensors


Replacement for Hubbell Remote Series 4000 Photo-Switch    Replacement for Hubbell Sensors Parts List
Replacement for Hubbell 9388 Pathfinder Hot Metal Detector
Replacement for Hubbell 9700 Long Range Proximity Sensor
Replacement for Hubbell 9800 Hot Metal Detectors Replacement for Hubbell 9900 Hot Metal Detectors
Replacement for Hubbell 9900 Hot Metal Detector Remote Lenses

 

 

CLICK HERE TO CONTACT  US

Copyright © 2002-2011 MODULOC CONTROL SYSTEMS

www.moduloc-usa.com